Best Tonneau Covers with a Toolbox (2026)
November 12, 2026 · 15 min read
You already bolted a crossover toolbox (a box that spans the bed from rail to rail) behind your cab, and now you want a cover over the rest of the bed. A tonneau cover with toolbox compatibility (a truck bed cover built to sit behind the box) makes that possible, but only when the cover and the box match in size. This guide picks four covers and shows you how to check the fit before you order.
Updated — first published
Quick answer
The best tonneau cover with a toolbox is the Extang Trifecta Toolbox 2.0 (part 93703), a soft tri-fold built to sit behind an 18–20 in. deep crossover toolbox on a Ford F-150 with a 6’7″ bed. Measure your box first: RealTruck says this line will not work with low-profile or plastic toolboxes.
Extang Trifecta Toolbox 2.0 (93703)
A soft tri-fold with an adjustable gap, made for 18–20 in. deep crossover boxes.
Extang Solid Fold 2.0 Toolbox (84703)
Rigid hard panels cut shorter than the bed, with a 3-year warranty.
Access Toolbox Edition Roll-Up (62309)
Rolls clear of 20–21 in. over-the-rail boxes, so check your box depth first.
Who this guide is for
This guide is for owners of full-size pickups who already run a crossover or over-the-rail toolbox, or plan to, and want weather protection over the rest of the bed.
This is for you if
- Your toolbox is bolted across the bed and you want to keep using it
- You carry tools up front and loose cargo behind them
- You drive a Ford F-150 with a 6’7″ bed or a similar full-size truck
Look elsewhere if
- You would rather skip the box and cover the whole bed: see best retractable tonneau covers (2026)
- Your truck has factory side storage boxes, because some covers in this class will not fit them
How these picks were chosen
Cedar Buy chose these covers by the toolbox size each one is built for, because a cover that does not match your box will not seal against it.
Our selection method
- Cedar Buy compared RealTruck’s Extang product pages and Access product descriptions as parts retailers publish them, in November 2026. Pick 4 has no manufacturer documentation that Cedar Buy could read.
- The toolbox size each cover accepts counted most, because it decides whether the cover works at all.
- Cedar Buy left out covers that state no toolbox size.
- Every pick is a vehicle-specific part number. Picks 1 and 2 are the parts for a Ford F-150 with a 6’7″ bed; other trucks need different part numbers.
- Specifications come from manufacturer documentation. Cedar Buy does not physically test products — see our editorial policy.
Tonneau cover with toolbox: quick comparison
The table compares the four picks on the toolbox size each cover accepts, which is the number that decides fit.
| Product | Toolbox size | Cover type | Best for | Link |
|---|---|---|---|---|
| Extang Trifecta Toolbox 2.0 (93703)Best overall | 18–20 in. deep crossover | Soft tri-fold | F-150 owners with a standard metal box | Amazon → |
| Extang Solid Fold 2.0 Toolbox (84703)Crossover boxes | 18–20 in. deep crossover | Hard tri-fold | Rigid panels over the cargo | Amazon → |
| Access Toolbox Edition Roll-Up (62309)Roll-up | 20–21 in. over-the-rail | Soft roll-up | Deeper boxes | Amazon → |
| Part Synergy Toolbox Tonneau Cover (A74-61399) | Confirm on the listing | Toolbox-compatible | Shoppers who verify fitment first | Amazon → |
What the table does not show
Every pick is a vehicle-specific part number. The Extang parts here fit a Ford F-150 with a 6’7″ bed, the Access part is listed for a 5’8″ bed on a different truck, and Part Synergy’s fitment is not confirmed. Open the listing and confirm your truck, model year and bed length before you order.
Toolbox-compatible vs toolbox-integrated
A toolbox-compatible cover is built to sit behind a box you buy separately, while a toolbox-integrated setup is a box and a cover made to work as one system. All four picks here are toolbox-compatible.
The integrated route exists too. TruXedo’s TonneauMate, for example, is a side-mounted box designed to sit alongside certain TruXedo covers. Running a tool box and tonneau cover from one brand removes the sizing question, but it locks you into that brand’s covers.
The compatible route lets you keep the box you own and choose a cover to match it, which is why this guide focuses on it. If you are still deciding between folding, rolling and hard-panel styles, read tonneau cover types explained first. Any bed cover with toolbox clearance still needs the size check in the next section.
Measuring your toolbox before you buy
Measure the depth of your toolbox, front to back along the length of the bed, because that is the number each cover in this guide is rated by.
| Cover type | Pick | Toolbox it is built for | Boxes to check first |
|---|---|---|---|
| Soft tri-fold | Pick 1 | 18–20 in. deep crossover | Low-profile and plastic boxes, which RealTruck says the line will not work with |
| Hard tri-fold | Pick 2 | 18–20 in. deep crossover | Factory side storage boxes on some trucks |
| Soft roll-up | Pick 3 | 20–21 in. over-the-rail | Low-sitting boxes whose locks or latches the cover can block |
Close the lid, then measure from the front face of the box to the back face with a tape measure. Write the number down and compare it to the range for your part number. A 19 in. box fits the Extang range, a 21 in. box fits only the Access range, and an 18 in. box fits only the Extang range.
The manufacturer pages Cedar Buy read list box depth, not box height, so this guide does not publish a height-clearance table. Access states that its Toolbox Edition lets the box open with the cover closed or rolled up. For any other cover, check that your lid swings open without touching the cover.
Notched covers explained
A notched cover has a section cut out of its front edge so it can wrap around a toolbox instead of stopping behind it.
None of the four picks is notched. Picks 1 and 2 stop behind the box and close the gap with an L-channel (an angled strip that bridges the space between the box and the cover), and Pick 3 stops behind it and seals with hook-and-loop strips.
A notch fits only the box shape it was cut for, so changing boxes later can mean changing covers. A cover that stops behind the box accepts a range of box depths, such as 18–20 in., which is why Cedar Buy ranks that design higher.
Extang Trifecta Toolbox 2.0 — Best overall
Pick 1 earns Best overall because it accepts the common 18–20 in. box range, bridges the gap with an adjustable L-channel, and carries what RealTruck lists as a limited lifetime warranty on the Trifecta Toolbox 2.0 line.
Extang Trifecta Toolbox 2.0 (93703)
Best for F-150 owners with a standard 18–20 in. boxA soft tri-fold cover, vinyl over an aluminum frame, built to sit behind an 18–20 in. deep crossover toolbox. Its adjustable L-channel sets the gap between box and cover. This part is for the Ford F-150 with a 6’7″ bed.
Price and availability change often — check the current listing.
Check price on Amazon → Paid link.Strengths
- Adjustable L-channel sets the gap to your box
- Tool-free clamps and no drilling
- Snap-on triple-fin seals guard against weather
Limitations
- Will not work with low-profile or plastic toolboxes
- Soft vinyl rather than rigid panels
Editorial opinion
Get it if your box is a standard metal crossover box 18–20 in. deep. Skip it if your box is plastic or low-profile, or if you want rigid panels.
If you have a standard 18–20 in. crossover box on an F-150, this is the one.
See it on Amazon →Extang Solid Fold 2.0 Toolbox — Best for crossover boxes
Pick 2 is best for crossover boxes because RealTruck says Extang builds it shorter than the bed on purpose, so it clears most 18–20 in. crossover toolboxes while keeping rigid panels over your cargo.
Extang Solid Fold 2.0 Toolbox (84703)
Best for owners who want hard panels behind a crossover boxA hard tri-fold with 1-in. thick EnduraShield TPO panels (a rigid, impact-resistant plastic). Fold it toward the bulkhead for two-thirds bed access. This part is for the Ford F-150 with a 6’7″ bed.
Price and availability change often — check the current listing.
Check price on Amazon → Paid link.Strengths
- Rigid panels resist impacts, abrasion and UV exposure
- Folds toward the bulkhead for two-thirds bed access
- Tool-free front clamps
Limitations
- Warranty is 3 years, against a limited lifetime on the Trifecta Toolbox 2.0 line
- Check for factory side storage boxes: RealTruck says its Silverado version will not work with them
Editorial opinion
Get it if you want a rigid cover and your box is 18–20 in. deep. Skip it if you need the full bed open at once, since the cover folds forward rather than coming off.
If you want hard panels behind an 18–20 in. box, this is the one.
See it on Amazon →Access Toolbox Edition — Best roll-up
Pick 3 is the best roll-up because it is made for deeper 20–21 in. over-the-rail boxes that the Extang ranges do not list, and it rolls up clear of the box.
Access Toolbox Edition Roll-Up (62309)
Best for owners with a 20–21 in. over-the-rail boxA soft roll-up cover from Access, a brand of Agri-Cover, made to sit behind most 20–21 in. over-the-rail toolboxes. The box and the cover work independently. Part 62309 is listed for a 5’8″ bed, so confirm the truck on the listing.
Price and availability change often — check the current listing.
Check price on Amazon → Paid link.Strengths
- Rolls up in seconds
- The box opens independently of the cover
- Auto latch locks when the cover is closed
Limitations
- Access warns it can block locks and latches on low-sitting toolboxes
- A box under about 20 in. deep may not match, so check your part number
Editorial opinion
Get it if your box is 20–21 in. deep and you want a cover that rolls out of the way. Skip it if your box is shallow or low-sitting.
If your box is 20–21 in. deep, this is the one.
See it on Amazon →Part Synergy Toolbox Cover — Also worth a look
Pick 4 earns a place because it is sold as a toolbox-compatible tonneau cover, but it ranks last because its box size range and fitment are not confirmed from manufacturer documentation.
Part Synergy Toolbox Tonneau Cover (A74-61399)
Best for shoppers who confirm fitment firstA tonneau cover sold under the Part Synergy brand for use with a toolbox. Treat it as a shortlist item and verify the truck, bed length and toolbox size on the listing before you order.
Price and availability change often — check the current listing.
Check price on Amazon → Paid link.Strengths
- Sold as a toolbox-compatible cover
Limitations
- Box size range not confirmed from manufacturer documentation
- Fitment must be checked on the listing
Editorial opinion
Consider it only after you confirm your truck and box size on the listing. Take Pick 1, 2 or 3 if you want published specifications.
If you have confirmed it fits your truck and box, it is worth a look. Otherwise take Pick 1.
See it on Amazon →What you give up in bed space
A crossover toolbox takes its own depth out of your bed length, so on a 6’7″ bed a box 18–21 in. deep leaves roughly 58–61 in. for cargo under the cover.
| Bed length | 18 in. box | 20 in. box | 21 in. box |
|---|---|---|---|
| 5’8" (68 in.) | 50 in. | 48 in. | 47 in. |
| 6’7" (79 in.) | 61 in. | 59 in. | 58 in. |
| 8’2" (98 in.) | 80 in. | 78 in. | 77 in. |
These are nominal figures. Real bed floors differ by truck and by a few inches, so measure yours. The box takes a fixed slice on every bed, which means a short bed feels the loss most.
A full replacement, meaning no crossover box and a side-mounted or cover-integrated box instead, gives you the whole bed length back. This guide does not rank a replacement product.
What to look for before you buy
Check four things before you order: the box depth the cover accepts, the exact part number for your truck, the cover style, and how the cover seals against the box.
Box depth range
The Extang picks accept 18–20 in. and the Access pick about 20–21 in. A box outside the range will not seal.
Part number for your truck
Each product name covers many trucks, and each truck has its own part number. Match year, model and bed length, not the name.
Cover style
Soft covers use vinyl over a frame, hard covers use rigid panels, and roll-ups wind onto a bar. Hard panels resist impacts better, and roll-ups need the least room to open.
The phrase “fits most toolboxes”
Ignore it. The depth range for your part number is the only figure that tells you whether your box fits.
Key terms, explained
Toolbox listings use a few terms that sound alike but describe different boxes.
Plain-language definitions
- Crossover toolbox
- A box that spans the bed from rail to rail, also sold as an over-the-rail toolbox. Standard depth runs about 18–21 in. front to back.
- L-channel
- An angled strip on the cover’s front edge that bridges the gap between the toolbox and the cover. Extang makes it adjustable on the Trifecta Toolbox 2.0.
- Low-profile toolbox
- A box that sits closer to the bed rails than a standard crossover box. Its lock and latch sit low, which can put them in a cover’s way.
Mistakes that cost people money
The most expensive mistake is ordering a cover by its product name instead of the part number for your truck, because the wrong part will not fit and may not be returnable.
- Measuring width instead of depthEvery range in this guide refers to depth, front to back. Measure that, with the lid closed.
- Assuming any toolbox worksRealTruck says the Trifecta Toolbox 2.0 line will not work with low-profile or plastic boxes.
- Ignoring factory side boxesSome covers in this class will not fit trucks with factory bedside storage. Read the fitment notes.
- Skipping the seal checkA cover that does not close the gap to the box lets water into the bed. Look for an L-channel or a hook-and-loop seal.
Frequently asked questions
Can you use a tonneau cover with a toolbox?
Yes, if the cover is built to sit behind the box. Toolbox-compatible covers such as the Extang Trifecta Toolbox 2.0 stop short of a crossover toolbox and seal against it, so you keep the box and still cover the rest of the bed. A standard full-length cover is not designed to go over a crossover box.
What size toolbox fits behind a tonneau cover?
It depends on the cover. The Extang Trifecta Toolbox 2.0 and Solid Fold 2.0 Toolbox accept 18–20 in. deep crossover boxes, and the Access Toolbox Edition is made for about 20–21 in. over-the-rail boxes. Measure your box front to back with the lid closed, then match it to the range for your part number.
Does a tonneau cover work with a low-profile toolbox?
Not always. RealTruck lists the Extang Trifecta Toolbox 2.0 line as not working with low-profile or plastic toolboxes, and Access warns that its Toolbox Edition can block the locks and latches on low-sitting boxes. Check the fitment notes for your part number before you buy a cover for a low-profile box.
How much bed space does a toolbox take?
A crossover toolbox takes its own depth in bed length, usually 18–21 in. On a 6’7″ bed that leaves roughly 58–61 in. behind the box, and on a 5’8″ bed roughly 47–50 in. These are nominal figures, bed length minus box depth, so measure your own truck.
So which one should you buy?
Get the Extang Trifecta Toolbox 2.0 if your box is 18–20 in. deep and your truck is a Ford F-150 with a 6’7″ bed.
| If you need | Best pick | Key spec | Buy |
|---|---|---|---|
| Best overall | Extang Trifecta Toolbox 2.0 (93703)Best overall | 18–20 in. deep boxes | Amazon → |
| Best for crossover boxes | Extang Solid Fold 2.0 Toolbox (84703)Crossover boxes | 1-in. hard panels | Amazon → |
| Best roll-up | Access Toolbox Edition Roll-Up (62309)Roll-up | 20–21 in. over-the-rail boxes | Amazon → |
| Also worth a look | Part Synergy Toolbox Tonneau Cover (A74-61399) | Confirm fitment first | Amazon → |
| If you are still unsure | Extang Trifecta Toolbox 2.0 (93703) | 18–20 in. deep boxes | Amazon → |
Article engagement
Comments (0)
No comments yet. Be the first to share what you think.
Sign in to join the conversation.